Compliance
What electrical jobs can you legally DIY in New Zealand?
New Zealand allows some electrical work by skilled owner-occupiers, subject to strict conditions. It is not a blanket ban on fixed wiring or permission to rewire without checks. First establish whether the homeowner exemption applies, what the job involves and whether a licensed electrical inspector must be involved. If unsure, use a licensed electrical worker.
Who the homeowner exemption is for
WorkSafe describes this as work in a home you own and live in, with no payment or reward. You need the knowledge and skills to work safely. Regulation 57 requires work relying on the domestic wiring exemption to follow ECP 51, including its testing requirements and limits. Read the official guidance before deciding; this article is not a wiring manual.
Replacing a fitting and changing wiring are different
WorkSafe lists certain replacements, including existing switches, socket outlets and light fittings, within the conditional exemption. That does not make every socket job suitable for DIY. Moving an outlet, adding one or changing its cable is a different scope from replacing an existing fitting.
For installing, extending or altering wiring, WorkSafe says not to connect it yourself: a licensed electrical inspector must check and test the completed work before connection. Consult the inspector before starting. Do not enter an enclosure where live conductors may be present. Switchboard work is excluded apart from the limited fuse-wire or cartridge replacements described in the guidance.
Rental properties do not use this DIY exemption
Owning a rental does not make you an owner-occupier of it. Tenancy Services says landlords cannot do fixed-wiring work, including fitting power points, in properties they rent out. Tenants cannot use the homeowner exemption either. Arrange a licensed electrical worker for rental fixed-wiring jobs.
Which documents to ask the electrical worker for
For work carried out by licensed electrical workers, EWRB distinguishes the paperwork by risk category. An Electrical Safety Certificate (ESC) applies to low-risk work too, not only higher-risk jobs. General work needs a Certificate of Compliance (CoC) and ESC. High-risk work also needs independent inspection and a Record of Inspection (RoI). A CoC is optional for low-risk repairs or replacements.
Ask which documents apply to the actual scope and keep them with the property records. The homeowner exemption has its own conditions; do not assume professional certification rules remove its inspection requirements.
How to check an electrician is registered
Every registered electrical worker in New Zealand has a number you can check on the Electrical Workers Registration Board public register. Ask for the number, look it up, and confirm the licence is current before the work starts. A genuine electrician will be happy for you to do exactly that.
Common questions
Can I install my own power point to save money?
Do not assume a new outlet is the same as replacing an existing fitting. Some work can fall within the owner-occupier exemption, but skills, ECP 51 and inspection conditions still apply. Use a licensed worker if you cannot confirm those conditions. The exemption does not cover fixed wiring in your rental property.
Can any electrician sign off wiring I have installed?
No. WorkSafe specifies a licensed electrical inspector for checking, testing and connecting installed or altered homeowner wiring. Arrange this before starting rather than assuming a later sign-off will be available.
Is an ESC only for high-risk work?
No. EWRB requires an ESC for low-risk, general and high-risk professional electrical work. CoC and independent inspection requirements depend on the work category.